Now, even a good seal cannot keep out water that’s exerting pressure on the seal. So if you’ve driven through hub deep water your skf bearings should be cleaned and repacked if they’re serviceable. If you have factory sealed bearings, you just need to watch for signs of premature failure.

A close-up look at the X-Dome cassette(left) reveals the black-anodized splines of its inner sleeve. The cassette simply spins onto the threads of the XD driver using a Shimano-type freehub lock-ring tool. The XD driver's outboard bearing is visible inside the cassette. In real life, you'll need to install the driver first (right). Slide the XD driver over the axle stub and then turn it counter-clockwise to engage the ratchet. The endcap then snaps onto the axle stub.

Bearing failure analysis, in order to improve the reliability of the work surface important part of systems engineering bearing (bearing functions in the loss of its provisions, resulting in the failure or does not work as a failure of the phenomenon known as (bearing failure can be divided according to their normal life failure and two early failure, which is the main reason for pitting and fatigue leading to early bearing failure analysis and recommend improvements to improve timken bearing life and reliability.

Bearing fatigue failure is a failure of the surface in the form, mainly as a fatigue crack initiation, propagation and fracture process, alternately under the long-term impact of the failure load of metal.

The tapered roller bearing using a glass fiber reinforced nylon 66 manufactured holder applies to the steady state of the working temperature does not exceed 120 degrees, the use of oil lubrication of this bearing, if the oil contains an additive, may result in shortening the life of the holder. When the temperature exceeds 120 degrees, the aging of the lubricant can also shorten the life of the holder. It should be observed and scheduled replacement of oil.

High quality lithium grease lubricated sealed nachi bearings use specially tested. This grease can withstand the high temperatures of 120 degrees short time. If a stable working temperature reaches 70 degrees or higher, standard lithium grease life will be shortened.

HCB71904CTP4SUL

HCB71906ETP4SUL

508748/10