Designed for use with Trailer Buddy Rubber Torsion and Spring Axles. This stainless steel bearing protector accepts the stainless push in cover cap #07509.NOTE:  This cap differs from the standard buddy bearing.  This model accepts the stainless push in center cap and will not fit standard rubber bras.Designed for exclusive use with the Trailer Buddy Axles by UFP. This wheel bearing protector cap fits inside bearing protector

Ideal for boat trailers in the marine environment, stainless steel buddy bearings provide the best in corrosion resistance. The design makes it an easy way to protect your trailers bearings by keeping water and dirt out and ensuring proper grease levels in the hub.Trailer buddy bearing protectors are perfect for boat trailers.  They provide excellent corrosion resistance and are entirely made of stainless steel.  The design makes it an easy way to protect your trailers timken bearings by keeping water and dirt out and ensuring proper grease levels in the hub.

Designed for use with the GOLD (Genuine Oil Lubricating Design) System by UFP.  The stainless steel bearing protector features an inspection window to easily check oil levels.O-Ring is for use with GOLD Series Hub.Rotors with an axle capacity up to 3750lbs.Designed for use with the GOLD (Genuine Oil Lubricating Design) System by UFP.  The stainless steel fag bearing protector features an inspection window to easily check oil levels.

O-Ring is for use with GOLD Series Hub/Rotors 4200lbs. -6000lbs.Replacment Vault cap for UFP Trailer Buddy Axles using the Vault HLS (Hybrid Lubrication System).Replacment Vault cap for UFP Trailer Buddy Axles using the Vault HLS (Hybrid Lubrication System).Fits models 1781 and 1810,Fits models 1980, 1980SS, 1980A, 1980A-SS, 1938, 1938SS, 1968, 1968SS, 2047, 2047SS, 2080 and 2080SSReplacement cover slides over Bearing Buddy to keep grease contained and off of your tires and wheels.Fits models: 2328, 2328SS, 2441, 2441SS, 2717, 2717SS, 2562, 2562SS, 2240 and 2240SS,Presses into 2.328" Trailer Buddy Bearing Protector to fit 2.441" Kodiak 12" Hub/Rotors

One of the problem with dunking a trailer in water is that if the hubs are warm (if not hot), when it hits cold water the grease contracts ... and it can ‘suck’ water into the hub.the solution is to fit Bearing Buddies. I fitted the latest Bearing Buddies – these have a blue plastic indicator ring ... you pump in grease until it protrudes a few mm ... and when it drops back flush you know to top up.I also fitted the interestingly named Bearing Buddie BRA’s ...... these are soft PVC covers that pop over the end of nachi Bearing Buddy ... keeps the whole thing clean, and should there be any leakage – through over-pressure hole ... stops it flying out onto wheel rims.

These simply press fit into end of brake drum instead of standard end cap .... they contain a reservoir of grease under spring pressure (with seals ).. then if grease contracts there is a spare supply that presses forward – preventing any voids or ingress of water.Has benefit that as grease is under pressure it forces it into every part of the roller assembly.There is a side effect on ‘some’ installs, if the stub axles is not perfectly smooth, the standard grease seal on back of hub as it now has some pressure on it may leak grease.There is a very simple & cheap ‘add-on’ which is a highly polished stainless ring that fits over the stub axle, and a re-sized rear grease seal is provided to suit ... kit also includes an O-ring ... so all 3 combine to give an effective grease seal.

csa204-12

csa205

csa205-16