taper roller bearings
taper roller bearings
Author :Admin | Publish Date:2013-05-27 08:54:04
High accuracy pressed steel cage controls roller position resulting in low
heat generation and reduced wear propertiesSingle Row [taper
roller bearings] .These bearings are capable of taking high radial loads and
also axial loads in one direction.Double Row Taper Roller BearingsThese bearings
are capable of taking high radial loads and also axial loads in two
directions.
Capable of taking high radial loads and axial loads in a single direction,
NSK taper roller bearings are also available in two and four row versions to
support axial loads in either direction. Optimised designs can be supplied with
high strength cages and, for arduous applications, in a range of advanced
special materials.Timken offers the most extensive line of tapered roller
bearings available anywhere in the world.
Tapered roller bearings are uniquely designed
to manage both thrust and radial loads on rotating shafts and in housings. We
manufacture nearly 26,000 tapered roller bearing combinations – in single,
double and four-row tapered roller bearing configurations. Customized geometries
and engineered surfaces can be applied to these tapered roller bearings to
further enhance performance in demanding applications.
Tapered roller bearings consist of four interdependent components: the
cone, or inner ring; the cup, or outer ring; the tapered rollers, or rolling
elements; and the cage, or roller retainer. The taper angles allow the bearing
to handle a combination of radial and thrust loads. The steeper the cup angle,
the greater the ability of the tapered roller bearing to handle thrust
loads.
The most basic and widely used tapered roller bearing, the single-row
tapered roller bearing consists of the cone assembly and the cup. It is usually
fitted as one of an opposing pair. During equipment assembly, single-row tapered
roller skf bearings can be set to the required
clearance or preload condition to optimize performance.
Double- or two-row tapered roller bearings feature double cups and two
single cones. Double- or two-row tapered roller bearings are available in a
variety of configurations for general industrial and automotive
applications.
Four-row tapered roller bearings combine the inherent high-load,
radial/thrust capacity and direct/indirect mounting variables of tapered roller
bearings into assemblies of maximum load rating in minimum space.
Tapered roller bearings are angular contact iko bearings comprised of separate components (cones and
cups), facilitating installation. By design they are suitable for combined
loading. They can sustain very high loads (axial load in one direction) and
tolerate slight misalignment.
BRING SKF RMS 20 (2 1/2 X 5 1/2 X 1 1/4)
BRING SKF RMS 22 (2 3/4 X 6 1/4 X 1 3/8)
BRING SKF RMS 28 (3 1/2 X 8 1/8 X 1 3/4)