electric motor bearings
electric motor bearings
Author :Admin | Publish Date:2013-04-12 16:22:37
We offer a wide range of SKF bearings, which conform to the special
requirements on noisiness and rotation accuracy of internal ring, according to
ISO standards for "electric motor bearings" .
In 1991 SKF Group passed the certification, including ISO 90014 standard,
and developed the new modern technologies of the rolling bearings production.
Due to these technologies, total control of every bearing element and
nonselective assembling, SKF Group obtained the quality, at which any standard
bearing, coming off its conveyer, corresponds to the noisiness class QE6 and
even to harder class QE5. At the same time any standard deep groove ball bearing
with the bore diameter of inner ring up to 85 mm corresponds to the precision
class P5 and noisiness class on the border between QE4 and QE5, and with the
diameter from 85 up to 420 mm corresponds to the precision class P6 and
noisiness class on the border between QE5 and QE6. In this connection SKF Group
stopped marking the special suffixes in the bearing designations (QE6, P6 etc.)
When ordering bearings for the electric motors application, please, take
this fact into consideration. For example, instead of the required by you
designation 6206/QE6 or 6206/P6, we will offer you the bearings with the
designation 6206, which excel as per their parameters the classes QE6 and
P6.
Our metric series miniature bearings (mini bearings) and small bearings are
available open, shielded or sealed, with bore sizes as small as 0.6mm. The
smaller sizes are sometimes referred to as instrument ina bearings or micro bearings. We provide metric sizes for
applications as varied as food processing and electric motor bearings. We
provide customers with model bearings for remote-controlled cars, thin section
bearings for bicycles, and skateboard bearings designed to provide a longer,
smoother ride.
The first protocol which needs to be established in any plant or factory is
whether ball bearings will be lubricated at all. A lot of companies may decide
to adopt a no lubrication policy as the result of lubrication damaging a
machine. It's true that correct lubrication can be tricky to get right, since
so many variables can effect when and how much grease should be applied, so
overall it can be easier to get hold of bearings which are manufactured to not
need lubrication. Sealed bearings have an elastomeric seal which prevents
contaminants getting into the bearing. These are especially useful in
particularly harsh environments such as very moist atmospheres but the seals can
fail when exposed to high heats or simply from mechanical stress. Generally
sealed fag bearings are useful in smaller machines
but may fail within as little as two years in larger machines.
B20-141C3U1UR
B22-19 C3
B25-139C3
Prev:engine bearings Next:electric motor bearings