Repacking auto bearings on boat trailer bearings is actually a typical maintenance challenge. Overlook this process and also you will be stranded beside the street when your wheel falls off! It really is not tough to repack the auto bearings over a little trailer with no brakes, as you don’t need to spine away the footwear or bleed the caliper.

Get rid of internal bearing. Clean both equally auto bearings, which should be lined and impregnated with dirty grease. If you wipe off as very much from the grease off with report towels prior to you use solvent it usually requires incredibly tiny solvent to have them clear. Inspect the rollers for any pits or scars, in the event you see any at all go invest in new auto bearings, which include new outer races. Take on the clean outdated auto bearings and seals with you, so the elements area can match them. I actually don’t like to reuse the seals, as they support to maintain the water out after you launch your boat.

If you ever have to open up a wheel hub on a trailer, chances are you're going in to either grease the FAG bearings or replace them because you didn't. The key is to make sure the boat trailer bearings stay greased on your own terms, so you don't find yourself replacing them on the side of the road at an inopportune time.

When installing boat trailer bearings or replacing them, you need a pair of pliers, a lug wrench, a hammer, a flathead screwdriver and the necessary means to jack the wheel up safely. Be sure to loosen the lug nuts with the lug wrench first. Once the wheel is in the air, all you have to do is follow a few simple steps.

Nothing is more heart-breaking than having trouble with your boat trailer bearings while on the way to that big fishing trip. You can prevent trouble by replacing the boat trailer wheel bearings before they go bad. It’s a simple procedure that can be performed by most do-it-yourselfers. You will find that it is much easier to perform this task without the boat on the trailer. In fact, I would suggest that you do it with the boat on the trailer only in case of an emergency.

Repacking wheel bearings on boat trailer bearings is a regular maintenance project. Overlook this task and you will be stranded beside the road when your wheel falls off! It is not hard to repack the INA bearings on a small trailer with no brakes, as you don't need to back off the shoes or bleed the caliper.

314553C4 BC4 1/WO

FC4054170/02

3052620